AnthemEpoxy Flooring (623) 000-0000
Golf course and desert foothills glowing at dusk

Anthem, Arizona · Floor coatings

Concrete floors with the polish of the rest of your home.

Garage, patio, interior and commercial coatings for Anthem and the north Valley — prepared properly, built in layers, and finished in colors that belong in the desert foothills.

Explore the systems
9
Coating systems
5 layers
In a typical flake garage
1 day
Fast-cure garage installs
0
Cuts into post-tension slabs

Epoxy flooring in Anthem

Most Anthem homes have beautiful finishes everywhere — except the concrete. We fix that.

Walk through almost any home in Anthem and you’ll find thoughtful details: stone accents, tile roofs, outdoor kitchens, carefully planned landscaping. Then you open the door to the garage and find bare gray concrete with an oil spot or two, or a patio slab that has faded, cracked and collected years of stains. Those surfaces get used every day, yet they’re often the last to receive any attention.

A professionally installed floor coating closes that gap. It gives garages, patios and interior slabs a finished, durable surface that is easy to clean and holds up to real life — kids’ bikes, muddy trail shoes, the boat trailer, the weekend project and the steady drift of desert dust.

Our work is built on preparation. Every slab is diamond-ground to remove the weak top layer, old sealers and paint. Cracks and chips are repaired. Moisture is tested. Only then do we build the coating system, layer by layer, using materials chosen for the space: a flexible base where a slab moves, a decorative flake broadcast for texture, and a UV-stable topcoat wherever sunlight reaches.

The result is a floor that looks like it belongs in your home — and still looks that way years from now. Start with our garage floor coatings, or explore every system below.

Why choose us

What Anthem homeowners tell us mattered.

  1. 01

    We explain the slab before we sell the floor

    Every estimate starts with a close look at the concrete — cracks, old coatings, moisture and how the space is used. You’ll understand what your floor needs and why.

  2. 02

    Grinding is non-negotiable

    Diamond grinding with HEPA dust collection gives coatings a clean, open surface to bond to. We don’t acid etch, and we don’t skip steps to save an hour.

  3. 03

    Systems, not single products

    The right floor often combines two or three chemistries. We explain each layer’s job and put it in writing, so quotes are easy to compare.

  4. 04

    Respect for your home and your neighbors

    Tidy setups, protected walls and driveways, sensible work hours and a clean site at the end of each day — the kind of crew you don’t mind having around.

Garage epoxy flooring

A garage floor is a system. Here’s what goes into ours.

In Anthem, the garage often works harder than any room in the house. It’s where SUVs and pickups park after the commute up I-17, where bikes and strollers live, where holiday decorations are stacked and where weekend projects happen. Bare concrete absorbs every drip, sheds dust onto everything and never quite looks clean.

Our standard garage system is built in layers, each with a specific job. Together they produce a floor that bonds tightly, resists hot tires and chemicals, hides everyday dust and keeps its color where the afternoon sun pours in through the open door. Three-car and tandem garages are common here, and we plan the work so large floors still go down evenly from wall to wall.

See garage systems in detail
TopcoatUV-stable polyaspartic — resists sun, scuffs and hot tires
Flake broadcastDecorative chips for color, texture and dust camouflage
Base coatPigmented epoxy or polyurea that grips the flake
Repairs & primerCracks filled, pores sealed, bond established
Ground concreteDiamond-ground to an open, even profile
Classic convertible parked in a garage with a coated floor
Outdoor dining terrace under a slatted pergola at sunset
Backyard lounge with an orange sectional on a light concrete patio
Poolside dining set on a sunny patio

Patios & outdoor living

Outdoor rooms deserve finished floors too.

Anthem is built for being outside — morning walks, evenings on the patio, weekends around the pool with Daisy Mountain on the horizon. Many backyards here have grown into true outdoor rooms with kitchens, fire features and shade structures. The concrete underneath is often the one piece that never got upgraded.

Our patio and concrete coatings are designed for the sun. We use UV-stable materials that don’t yellow, choose lighter colors that stay more comfortable underfoot, and build in texture so the surface stays secure when it’s wet from the pool or a summer storm. Courtyards, covered patios, pool decks and front entries all benefit.

Planning a visible front entry or walkway? We’ll bring samples you can share with your HOA if your neighborhood reviews exterior changes.

Timing matters outdoors, too. Fall through spring is the sweet spot for patio work here — comfortable temperatures, dry days and the season when backyards get the most use. Summer jobs start before the heat builds, and we track the radar so fresh resin never meets an afternoon cloudburst.

Your floor. Done right, the first time.

Free on-site estimates across Anthem and the north Valley. Expect samples, a slab test and a written plan — no hard sell.

(623) 000-0000

Installation process

From bare slab to finished floor.

Swipe or scroll through the steps. Most garages are complete in one to two days; interiors and large commercial floors take longer.

Bare concrete garage floor before coating
Step 1

Consult & test

We measure, inspect cracks and old coatings, check moisture and show you real samples. You get a written, itemized proposal.

Installer running a diamond grinder across a concrete slab
Step 2

Grind

Diamond grinders with HEPA vacuums open the surface evenly. Edges and corners are finished with smaller tools.

Sweeping dust from a ground slab before coating
Step 3

Repair & clean

Cracks and spalls are filled and ground flush. The floor is vacuumed spotless so nothing gets trapped under the coating.

Pigmented epoxy resin being poured onto a floor
Step 4

Base & design

The base coat goes down and the look is built — flake broadcast, solid pigment or metallic movement.

Installer troweling a self-leveling coating
Step 5

Topcoat

A clear, sun-stable topcoat seals and protects. Optional grit adds traction where you need it.

Classic convertible parked in a garage with a coated floor
Step 6

Walkthrough

We review the floor together and give you clear timing for foot traffic, parking and moving back in.

Benefits of professional epoxy flooring

Why a properly installed coating pays off.

Stays bonded

Mechanical prep and commercial-grade materials resist the hot-tire peeling and flaking that plague DIY kits.

Cleans in minutes

Spills, mud and leaves wipe or hose away instead of soaking into porous concrete.

No more concrete dust

Sealed slabs stop shedding the fine powder that coats shelves, bikes and stored belongings.

Better grip

Flake texture and optional grit help keep footing secure on wet patios and in garages.

Color that lasts

UV-stable topcoats keep floors from yellowing where Arizona sun reaches them.

Adds appeal

A finished garage and patio make a home feel complete — and they show well when it’s time to sell.

Auto detailing shop with a coated floor and shelving

Commercial & industrial flooring

For the businesses that keep Anthem running.

Anthem’s retail centers, restaurants, salons, fitness studios, clinics and service shops all depend on floors that look good and clean quickly. Our commercial epoxy flooring systems are chosen for each environment — slip-resistant textures for kitchens, chemical-resistant topcoats for salons and detail shops, decorative finishes for showrooms. We work nights and weekends when needed so you don’t lose business days.

For storage buildings, contractor shops and light-industrial spaces along the I-17 corridor, our warehouse floor coatings focus on abrasion resistance, dust control, joint repair and clear safety striping, phased around your operations.

Local flooring considerations

Things we account for on every Anthem project.

Saguaro and cholla catching the first light of sunrise

Post-tension slabs

Much of Anthem was built from the late 1990s onward, and post-tension foundations are common. These slabs contain tensioned steel cables, so we never saw-cut, core or drill. Surface grinding is safe, and all of our standard prep stays at the surface.

Foothill sun and heat

Sitting a bit higher than central Phoenix doesn’t make summer gentle. Garage slabs heat up quickly and sunlight reaches deep through open doors. We schedule summer work early in the day and finish every sun-exposed floor with a UV-stable topcoat.

Monsoon dust and rain

Summer storms drive dust under garage doors and send water across patios. Mid-tone flake blends hide the dust, and textured finishes keep wet surfaces secure.

HOA guidelines

Interior and garage floors are typically your call, but visible surfaces like front entries and walkways may fall under neighborhood guidelines. We’re glad to provide samples and product information if you need approval.

Bigger garages, bigger plans

Three-car, tandem and RV-height garages are common. Larger floors need careful sequencing so the flake broadcast and topcoat look consistent from one end to the other.

What to expect from a quote

A visit that answers questions, not a sales pitch.

Our estimates happen at your home, because a floor can’t be priced properly from a photo. We start by walking the space with you and asking how it’s used. Is the garage mostly for parking, or is there a workbench and a treadmill too? Does the patio get afternoon sun? Is there a trailer that parks in the third bay? Those answers shape the system as much as the concrete does.

Then we look closely at the slab. We check for hairline cracks and chipped joints, look for builder sealer or old paint, take moisture readings and note anything that will need extra attention during prep. If your home sits on a post-tension foundation, we’ll explain how our surface-only preparation keeps those cables safe.

Last, full-size chip and color boards go right on your concrete so you can judge them under your own lights. You leave with an itemized written quote that lists the preparation, any repairs and each coating layer — so you can compare it fairly against anyone else’s.

  • How you use the spaceParking, storage, hobbies, pets, trailers — the system follows the use.
  • Slab inspectionCracks, joints, sealers, old coatings and moisture readings.
  • Samples in your lightFull-size flake and color boards on your actual floor.
  • Itemized quotePrep, repairs and every layer listed in writing.

Service areas

Anthem and the north Valley foothills.

We’re centered on Anthem and serve neighborhoods along the I-17 corridor and into the foothills. Travel time rarely changes our approach, but it helps us schedule well — so let us know where you are.

Explore our service areas
  • Anthem ParksideFamily neighborhoods around the community park and Daisy Mountain trailheads.
  • Anthem Country ClubGolf-course homes with oversized garages and outdoor living spaces.
  • Desert HillsCustom homes on larger lots with detached garages and shops.
  • New RiverRural properties, workshops and equipment barns north of Anthem.
  • Tramonto & North PhoenixMaster-planned neighborhoods along the I-17 corridor south of Anthem.
  • Cave CreekDesert-style homes, casitas and courtyards to the east.
  • Black Canyon CityHill-country homes and shops further up I-17.

FAQ

Questions, answered straight.

Rugged desert ridgeline above Sonoran scrub
My home has a post-tension slab. Can it still be coated?

Yes. Many homes in Anthem were built on post-tension slabs, which contain tensioned steel cables. Coating is completely safe because we only grind the top surface — we never cut, core or drill into the slab. If a repair ever calls for anything deeper, we stop and discuss it with you first.

Does my HOA need to approve a floor coating?

Garage and interior floors generally aren’t visible from the street, so they rarely need approval. Front entries, walkways and driveways can be a different story. If the area is visible, check your neighborhood guidelines before choosing a color; we’re happy to provide samples or product information for your submission.

How long does a typical Anthem garage take?

Most two- and three-car garages take one to two days. With a fast-cure polyaspartic system, the whole floor can often be finished in a single day, with foot traffic the next morning and vehicles back within a few days.

Which finish hides dust best?

A full-broadcast flake floor in a mid-tone blend. Sand, tan and gray mixes disguise the fine desert dust that drifts in under garage doors far better than solid colors or very light and very dark blends.

Is an epoxy patio too hot to walk on in summer?

Color makes the biggest difference. Light, reflective shades stay far more comfortable than dark ones, and a textured finish keeps feet secure. We help you choose a color suited to your patio’s sun exposure.

Will my new floor turn yellow?

Standard epoxy can amber in sunlight, which is why we finish garages, patios and sunny rooms with a UV-stable polyaspartic or aliphatic urethane topcoat that keeps colors true.

Can you coat a floor that has old paint or a DIY kit on it?

Yes. We grind off old paint and failing coatings completely so the new system bonds to clean concrete. Coating over a weak layer is the most common reason floors fail.

Do you offer estimates outside Anthem?

We regularly work in Desert Hills, New River, Tramonto and the north Phoenix neighborhoods along I-17, as well as Cave Creek and Black Canyon City. Ask about your location.

Start your project

Let’s give your concrete the finish it’s been missing.

Tell us about your space and we’ll schedule a free on-site visit. You’ll get samples, a moisture check and a written, itemized quote — with no pressure to decide on the spot.

Or call (623) 000-0000

Request your free quote